Setting Hdd Property - HIKVISION DS-96128NI-I16 User Manual

7. Select the Group number for the current HDD.
The default group No. for each HDD is 1.
8. Click the OK button to confirm the settings.
9. In the pop-up Attention box, click the Yes button to finish the settings.

13.4.2 Setting HDD Property

Purpose:
The HDD property can be set to redundancy, read-only or read/write (R/W). Before setting the HDD property,
please set the storage mode to Group (refer to step1-4 of Chapter Setting HDD Groups ).
A HDD can be set to read-only to prevent important recorded files from being overwritten when the HDD becomes
full in overwrite recording mode.
When the HDD property is set to redundancy, the video can be recorded both onto the redundancy HDD and the
R/W HDD simultaneously so as to ensure high security and reliability of video data.
Steps:
1. Enter the HDD Information interface.
Menu > HDD> General
2. Select HDD from the list and click the
Figure 13. 15.
3. Set the HDD property to R/W, Read-only or Redundancy.
4. Click the OK button to save the settings and exit the interface.
5. In the HDD Information menu, the HDD property will be displayed in the list.
Network Video Recorder User Manual
Figure 13. 14 Confirm HDD Group Settings
icon to enter the Local HDD Settings interface, as shown in
Figure 13. 15 Set HDD Property
185