HIKVISION DS-96128NI-I16 User Manual page 172

1. Enter the Physical Disk Settings interface.
Menu > HDD > RAID > Physical Disk
2. Click Create button to enter the Create Array interface.
3. Edit the Array Name; set the RAID Level to RAID 0, RAID 1, RAID 5, RAID6, or RAID 10; select the
Physical Disk that you want to configure array.
 If you choose RAID 0, at least 2 HDDs must be installed.
 If you choose RAID 1, 2 HDDs need to be configured for RAID 1.
 If you choose RAID 5, at least 3 HDDs must be installed.
 If you choose RAID 6, at least 4 HDDs must be installed.
 If you choose RAID 10, the number of HDDs installed should be even in the range of 4 to 16.
4. Click OK button to create array.
If the number of HDDs you select is not compatible with the requirement of the RAID level, the error message box
Network Video Recorder User Manual
Figure 12. 7 Physical Disk Settings Interface
Figure 12. 8 Create Array Interface
171