Table of Contents
Advertisement
System
S tartup
* See the labelled image below for location of each switch
1. Mercury-Metal Halide Fluorescence Lamp
2. Green confocal control switches found on the right side of the desk (from left to right)
-PC/Microscope, Scanner Power and Laser Power
Turn the Laser Emission key to the ON position
3. The PC will boot automatically, login using your windows user account. If you have
been trained on the system a user account will have been created for you.
4. Launch LAS AF using the Desktop icon
5. The software initialises devices during start up, when messages appear click OK to
proceed.
6. Select the Configuration tab and laser. Tick the boxes of the lasers you want to turn
on. Move the Argon slide bar to 50% output
3
Advertisement
Table of Contents
