Generalscan FS01&MS3391-L Configration User Manual page 12

6-5 Indication
Power-ON alert: After power-on the engine will send a boot up event message to the host. The boot-up
event message format is 0x05, 0xF6, 0x00, 0x00, 0x03, 0xFF, 0x02. The detailed event message is
described in section "7-8 EVENT".
LED-ON duration: This parameter can be adjusted for each successful reading.
Beeper indication: After each successful reading, the engine will beep to indicate a good barcode
reading.
Beep duration: This parameter can be adjusted for a good reading upon favorite usage.
Parameter name
Power-ON alert
LED-ON duration
Beeper indication
Beep duration
FS01 & MS3391-L
Para. code Para. option
Disable
0x01 0xF5
Enable
00-99
0x01 0xF6
(100ms)
Disable
0x01 0xF7
Enable
01-09
0x01 0xF8
(25ms )
Para. value
00* Boot up Event
01 (0xF0 0x02)
00-99 LedOnDuration
10* (0xF2 0x20)
00 Beep After Good
01* Decode (0x38)
01-09
-
03*
25
Reserved
Parameter
Para. value
(Para. No.)
00*
01
10*
00
01*
- (125ms)