Table of Contents
Advertisement
6 Parameter menus
6-1 Introduction
This section describes the programmable parameters, provides barcodes for programming
The engine is shipped with the factory default settings as described in this chapter.
factory-default-settings values are stored in flash memory and are preserved even when the engine is
powered down. Changes to the factory default values can be stored as custom defaults. These
values are also stored in flash memory and are preserved even when the engine is powered down.
There are two methods to change the parameter values as described following.
Scan the appropriate barcodes as the example shown in the following Section 6-2. The new
values replace the existing memory values.
20
These
Advertisement
Table of Contents
