Table of Contents
Advertisement
6-31 Enable & Disable scanning configuration barcode
*
*Enable scanning configuration barcode
The default status of the engine is enabled to scan configuration barcode, and the parameter of
"Parameter Scanning (0xEC)" in Table 6-1 is set 0x01.
Disable scanning configuration barcode
Scan the above barcode to disable scanning configuration barcode, and the parameter of
"Parameter Scanning (0xEC)" in Table 6-1 is set 0x00. Then the engine will not operate
configuration by scanning configuration barcode, but the data string of configuration barcode
will be displayed.
Note: The setting of the above two barcodes does affect the operation of scanning the barcodes
in section 6-30.
62
Advertisement
Table of Contents
