Generalscan FS01&MS3391-L Configration User Manual page 42

6-27 G1-G4 & FN1 substitution string setting
Format of barcode data transmission
Prefix Code name
Suffix string setting: The <enter > key is represented in different ASCII when it is applied by different OS.
For a Windows/DOS OS, <enter> is represented as <CR><LF> (0x0D 0x0A); for an Apple MAC OS,
<enter> is represented as <CR> (0x0D); for a Linux/Unix OS, <enter> is represented as <LF> (0x0A).
Prefix/Suffix string setting: & Preamble/Postamble string setting:
They are appended to the data automatically when a barcode is decoded.
Example: Add a type of barcode of "$" as a prefix for all types of barcode.
Steps:
1) Scan SETUP and Prefix string setting barcode.
2) Use the ASCII table to find the value of $→24.
3) Scan barcode 2 and barcode 4 in section "6-32 Configuration alphanumeric entry barcode (as Para.
value)".
4) Scan END barcode.
5) Refer to section "6-29 String transmission", set Prefix transmission to be Enable.
Scanning steps: Scan the following barcodes in order.
Insert G1/G2/G3/G4 string setting: The engine offers 4 positions and 4 character strings to insert among
the barcode data string.
Example: Set G1 string to be "AB".
Original code data
Output code data
Steps:
1) Scan SETUP and Insert G1 string setting barcode.
2) Use the ASCII table to find the value of A→41, B→42.
3) Scan 4, 1 and 4, 2 in section "6-32 Configuration alphanumeric entry barcode (as Para. value)".
4) Scan END barcode.
5) Refer to section "6-28 G1-G4 string position & Code ID position".
6) Refer to section "6-4 Trigger mode & some global settings".
Preamble Code ID
"1 2 3 4 5 6"
"1 2 A B 3 4 5 6"
Code length Code data
55
Code ID Postamble Suffix