Table of Contents
Advertisement
1 Specifications
1-1 Technical specifications
Item
Input voltage
Scanning current
Standby current
Laser
Scan rate
Scanning angle
Decode capability
Indicator interface
Interface supported
Scan mode
Dimensions
Weight
Cable
Temperature
Humidity
Programming method
Firmware upgrade
Decoding depth
& Max. resolution
Mechanical vibration
Mechanical shock
Table 1-1 Technical specifications @25°C
3.3 VDC ± 5%
75mA typical/85mA maximum
<8μA
650nm laser diode
100±10 scans/second
±50°, ±65°, ±35° (Skew, Pitch, Roll)
UPC-A, UPC-E, EAN-13, EAN-8, ISBN/ISSN, Code 39, Code 39 full ASCII,
Code 32, Trioptic Code 39, Interleaved 2 of 5, Industrial 2 of 5, Matrix 2 of 5,
Codabar (NW7), Code 128, Code 93, Code 11(USD-8), MSI/Plessey,
UK/Plessey, UCC/EAN 128, China Post, GS1 DataBar (formerly RSS) variants
To control external Beeper and LED
UART
Good-read off, Momentary, Alternate, Continuous, Host
Height × Width × Depth: 12.0mm × 21.6mm × 15.5mm (maximum)
8.00±0.25g
Tapered 12-pin flex strip (12 x 0.5mm)
Operating: -10°C to 60°C (-4°F to 140°F);
Storage: -40°C to 70°C (-40°F to 158°F)
5% to 90% (non-condensing)
Method I: Manual (scanning special barcode in sequence)
Method II: send command via UART interface
Online
(1 mil = 0.0254 mm)
4 mil: 42- 75 mm
5 mil: 40-105 mm
10 mil: 10-250 mm
15 mil: 23-380 mm
20 mil: 35-490 mm
30 mil: 30-650 mm
55 mil: 75-900 mm
See section of "1-3 Decode zone"
IEC 60068-2-6
Un-powered engine withstands a random vibration along each of the X, Y and Z
axes for a period of one hour per axis, define as follows:
20 to 80 Hz
80 to 350 Hz
350Hz to 2000Hz
IEC 60068-2-27
Shock pulse: 0.5ms, Maximal acceleration: 1500G, Shock direction & time:
±X-axis, ±Y-axis, ±Z-axis, 3 times for each direction, total of 18 times.
Description
2
Ramp up to 0.04G
/Hz at the rate of 3dB/oct
2
0.04G
/Hz
Ramp down at the rate of 3dB/oct
2
Advertisement
Table of Contents
