String Transmission - Generalscan FS01&MS3391-L Configration User Manual

Laser barcode scanner

Table of Contents

6-29 String transmission

Note: The information in this chapter is closely related to the chapter of G1-G4 & FN1 substitution string

setting.

Format of barcode data transmission

Prefix

Code name

Preamble

Code ID

Code length

Code data

Code ID

Postamble

Suffix

Preamble transmission: By setting Enable, preamble will be appended before the data transmitted.

Postamble transmission: By setting Enable, postamble will be appended after the data is transmitted.

Code ID transmission: Code ID can be transmitted in the format of either Proprietary ID or AIM ID.

Refer to section "1-2 Default settings for various types of barcode".

Code length transmission: The length of code data string can be transmitted before the code data when

Enable is selected. The length is represented by a number with two digits.

Code name transmission: By setting Enable, code name will be transmitted before code data.

Case conversion: The characters within code data or the whole output string can be set in either upper

case or lower case.

FN1 substitution transmission: The engine supports a FN1 substitution feature. The replacement string

of FN1 can be chosen by user (see section "6-27 G1-G4 & FN1 substitution string setting").

Table of Contents