Tcp Link Mode (Binary); Nmea Log Mode - Teltonika FM5500 User Manual

This mode is the same as above but binary message will be accepted to/from COM port.
This mode also have some advanced filtering capabilities.
1. External Devices ->COM2 Settings->Baudrate = any of available baudrates
2. External Devices ->COM2 Settings->Mode = TCP Link Mode
3. External Devices ->COM2 Settings->Parity = any setting
4. External Devices ->COM2 Settings->Timeout = any setting (x10 msec.)
(How much time to wait before detecting end of packet)
5. External Devices ->COM2 Settings->Parity = any setting
6. External Devices ->COM2 Settings->Prifix1 = any setting
(incoming 1 byte must match to Prefix1 to be accepted)
7. External Devices ->COM2 Settings->Prifix2 = any setting
(incoming 2 byte must match to Prefix2 to be accepted)
8. External Devices ->COM2 Settings->Prifix3 = any setting
(incoming 3 byte must match to Prefix3 to be accepted)
(0 and 255 don't care)
In this mode NMEA logs are sent via COM1 and COM2 ports.

TCP Link Mode (Binary)

NMEA Log Mode

84