Setting The Button Background Illumination - Dxp 1616 Series Only; Troubleshooting; Configuration Worksheets - Extron electronics DXP 44 HD 4K User Manual

Dxp hd 4k series 4k hdmi switchers dxp 88 series dxp 1616 series
Hide thumbs Also See for DXP 44 HD 4K:
Table of Contents

Advertisement

Setting the Button Background Illumination — DXP 1616 Series Only
The buttons on the front panel can be set to have amber background illumination at all times
or the background illumination can be turned off.
To toggle the background illumination on and off, press and hold the Input 1 and Input 2
buttons simultaneously until the button background illumination changes (approximately
2 seconds.
Press and hold the Input 1 and Input 2 buttons
simultaneously to toggle background illumination
mode on or off.
After approximately 2 seconds, release the Input 1 and Input 2 buttons.
Figure 79.

Troubleshooting

The following are recommendations for actions to take if you have problems operating the
switcher:
1.
2.
3.
4.
5.
6.

Configuration Worksheets

Instead of trying to remember the configuration for each preset, use worksheets to record
this information. Make copies of the
for each preset configuration. Cross out all unused or inactive inputs and outputs. The
worksheet is generic for all models of DXP. Disregard or cross out boxes for inputs and
outputs that your switcher does not have.
NOTE: The worksheet examples on these pages use a form that is set up for a
1
2
3
4
5
6
1
2
3
4
5
6
Toggle Background Illumination On or Off
Ensure that all devices are plugged in and powered on. The switcher is receiving power
if the Reset/Power LED is lit.
Check to see if one or more outputs are muted.
Ensure that an active input is selected for output on the switcher.
Ensure that the proper signal format is supplied.
Check the cabling and make corrections as necessary.
Call the Extron S3 Sales & Technical Support Hotline if necessary.
DXP 1616, you can use the same worksheet form provided on page 56 for all models
of the DXP HD 4K. Use only the input and output cells that you need to configure your
own system.
INPUTS
7
8
9 10 11 12
7
8
9 10 11 12
OUTPUTS
blank worksheet
on page 56, and use one sheet
DXP HD 4K Series • Operation
13
14 15 16
13
14 15 16
53

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dxp 84 hd 4kDxp 1616 hd 4kDxp 88 hd 4kDxp 168 hd 4k

Table of Contents