Extron electronics DXP 44 HD 4K User Manual page 47

2. Press and hold the
Preset
Press and hold the Preset button until it blinks.
PRESET
Preset Assigned
1 2 3 4 5
No Preset Assigned
Figure 57. Entering Save Preset Mode
3. Press and release the input or output button for the desired preset.
Press and release the Input button
for the desired preset number.
The button blinks to indicate that this
preset number is selected but not saved.
1 2
3 4 5
Figure 58. Selecting the Preset
4. Press and release the
Enter
selected memory location.
Press the Enter button to
save the preset.
C O N T R O L
VIEW ESC
ENTER PRESET
The Enter and Preset
buttons return to unlit or
background illumination.
Figure 59. Pressing the Enter Button
DXP 1616 Series — Recalling a preset
In the following example, a preset is recalled to become the current configuration. The steps
show the front panel indications that result from your action.
1. Press and release the
Esc
Press the Esc button to clear all selections.
C O N T R O L
VIEW ESC
ENTER PRESET
The button blinks once.
Figure 60. Clearing All Selections
button until it blinks (approximately 2 seconds).
PRESET
2 seconds
All buttons with assigned presets
light.
If you then save the configuration
to a lit preset number, the
configuration data at that preset
location will be overwritten.
INPUTS
6 7 8 9 10 11 12
C O N T R O L
PRESET
ENTER
The Enter button blinks to indicate the
•
need to save the preset.
The Preset button continues to blink.
•
INPUTS
6 7 8 9 10 11 12
button. The current configuration is now stored in the
All input and output buttons return to
unlit or background illumination.
>
button.
DXP HD 4K Series • Operation
13 14 15 16
VIEW ESC
13 14 15 16
39