Fujitsu primequest 2400E2 Design Manual page 90

3.3.1 Boot Type Selection
Boot type
Internal HDD or SAS-SSD (*1)
External HDD cabinet
FC boot in an external file unit
(SAN environment)
FCoE boot in an external file unit
(SAN environment)
iSCSI boot in an external file unit
(SAN environment)
Preboot eXecution Environment (PXE)
Boot from a virtual media
Boot from a device connected to the front
USB port on the Home SB
(*1) For details on the internal storage in the cabinet, refer to
It is recommended to use a redundant HDD (hardware RAID or software RAID) as a boot HDD.

When an internal disk is used as a boot device, RAID is configured at the same time as the OS

installation using ServerView Installation Manager (SVIM).
PRIMEQUEST 2000 Series Design Guide
Boot devices
DU
Internal disk for an SB
JX40 S2 with a SAS card for connection
FC card
CNA
LAN card, and LAN port on an IOU
LAN card, and LAN port on an IOU
Device or file that is set as a virtual media
USB connected device (e.g. CD and DVD)
"3.3.2 Guidelines for Selecting Internal
89
Usage
Boot an OS that is installed in an internal HDD.
Boot an OS that is installed in an external HDD cabinet.
Boot an OS that is installed in an external disk array device.
Boot an OS that is installed in an external disk array device.
Boot an OS that is installed in an external disk array device.
Boot via remote operation.
Boot from a device or file that is set as a virtual media.
Boot from a USB connected device that is used temporarily for
operations such as system configuration. (This operation is not
available when the front bezel is removed.)
Storage".
Copyright 2016-2017 FUJITSU LIMITED