Table of Contents
Advertisement
3.2.2 Functions That are Used for Partition Configuration - Home SB
Home SB
The main SB among the SBs that are used to configure a PPAR block.
Functions That Are Enabled on the Home SB
•PCH (*1)
Onboard I/O is enabled, and USB ports and a VGA port can be used only on the
Home SB.
•Reference clock source
The clock source of the Home SB becomes the clock source in the partition.
Selection of the Home SB
Specify the Home SB by using the MMB Web-UI.
If the Home SB is not specified directly, the first SB that is incorporated in the
partition is specified as the Home SB.
* If the Home SB is removed from the partition or is degraded, the SB with the lowest
number in the partition is specified as the Home SB.
(*1) PCH: An Intel C600 series with built-in controllers such as USB controllers, APIC, and RTC
PRIMEQUEST 2000 Series Design Guide
66
Copyright 2016-2017 FUJITSU LIMITED
Advertisement
Table of Contents
