Fujitsu primequest 2400E2 Design Manual page 69

3.2.2 Functions That are Used for Partition Configuration - Reserved SB (2/6)
Wait Time for Reserved SB Switching

From 0 to 99 minutes can be set for the shutdown wait time when a Reserved SB
that is used in another partition is switched by using the MMB Web-UI (the
default setting is 10 minutes).
If the partition cannot be shut down after a specified time has passed, the
Reserved SB is forced to be activated.
Saving the Partition Configuration Information

Before Reserved SB switching is performed, the partition configuration
information for the entire cabinet is automatically saved to the MMB.
• The latest partition configuration information overwrites the existing
information right before a Reserved SB replaces the failed SB (before the system
reboots).
• The saved information can be viewed from the MMB Web-UI.
Memory Scale-up Board

Memory Scale-up Boards cannot be used as the source or the target of Reserved
SB switching.
PRIMEQUEST 2000 Series Design Guide 68 Copyright 2016-2017 FUJITSU LIMITED