Table of Contents
Advertisement
1.6 Features (4/7)
Dynamic Reconfiguration
Dynamic Reconfiguration links with RHEL to enable the addition or the removal of
hardware resources such as CPUs, memory, and I/O in a partition without stopping the
PPAR system.
Adding or removing SB units or IOU units with PCI Box LH modules is possible.
Notes on hot removal of SBs:
2400E2/2800E2 supports hot removal of SBs for RHEL 7.1 or later.
2400E3/2800E3 supports hot removal of SBs for RHEL 7.2 or later.
RAID
For details, refer to
Software RAID and hardware RAID ensures the reliability and availability of the system.
Redundancy
By duplicating or multiplexing internal components, even if memory or other hardware
fails, it is possible to prevent the system operation from being stopped.
PRIMEQUEST 2000 Series Design Guide
"3.3 Key Points for I/O Configuration
23
Design".
Copyright 2016-2017 FUJITSU LIMITED
Advertisement
Table of Contents
