Fujitsu primequest 2400E2 Design Manual page 87

3.2.4 Configuration Example (F) - Physical Partitioning
System boards and IO units in a cabinet are combined and divided into PPAR blocks.

PPAR blocks are independent of each other. The hardware configuration and OS can be

different between the PPAR blocks.
Each PPAR block consists of at least one SB, at most four SBs (for 2800E2/2800E3) or

two SBs (for 2400E2/2400E3), and at least one IOU.
After the initial build, the configuration can be modified based on the operation condition.

* When Dynamic Reconfiguration is not used, the PPAR block to be modified must be stopped.
Example: Server integration, enhancement of the future scale-up range of a server

PRIMEQUEST 2800E3
Partition#0
SB
CPU CPU
Memory Memory
IO unit
Redundancy Redundancy
PRIMEQUEST 2000 Series Design Guide
Partition#1
SB
CPU CPU
Memory Memory
IO unit
Redundancy Redundancy
86
Partition#2
SB
CPU CPU
Memory Memory
IO unit
Redundancy Redundancy
SB
CPU CPU
Memory Memory
IO unit
Copyright 2016-2017 FUJITSU LIMITED