Intelrmt Configuration - Avalue Technology EMX-BSWP User Manual

EMX-BSWP User's Manual
USB transfer time-out
Device reset time-out
Device power-up delay
Generic-SD/MMC 1.00

3.6.2.16 IntelRMT Configuration

80 EMX-BSWP User's Manual
Disabled Support.
1 sec
5 sec The time-out value for Control, Bulk, and Interrupt
10 sec transfers.
20 sec[Default]
10 sec
20 sec[Default] USB mass storage device Start Unit command
30 sec time-out.
40 sec
Maximum time the device will take before it
properly reports itself to the Host Controller. 'Auto'
Auto[Default]
Manual uses default value: for a Root port it is 100ms, for
a Hub port the delay is taken form Hub descriptor.
Mass storage device emulation type. 'AUTO'
Auto[Default]
Floppy enumerates devices according to their media
format. Optical drives are emulated as 'CDROM',
Forced FDD
Hard Disk drives with no media will be emulated according
CD-ROM to a drive type.