Avalue Technology EMX-BSWP User Manual page 13

Mechanical &
Environmental
Power
Requirement
ACPI
Power on Type
Operating Temp.
Storage Temp.
Operating
Humidity
Size (L x W)
Weight
Note:
1. If user want to install Win 8.1 Pro OS on eMMC of EMX-BSWP motherboard, User must do:
A. BIOS setup menu must select eMMC mode with "PCI mode"(because selection with "ACPI mode" during
OS install, OS cannot find eMMC to install).
B. Windows OS must use Microsoft Win 8.1 Pro with update version of OS image to install.
2. Brightness control method choose "OS driver", due to Win7 VGA Driver will cause brightness at 100%,
Backlight adjustment only support to maximum voltage to 2.5V. Therefore, should change item value string as
Image 1, when choose Brightness control method "OS driver", please use OS Win8/10.
3. Win7 does not support SD card.
4. When OS is Win7/DOS(default), please choose "Legacy System/Win7" at BIOS setup item. When OS is
Win8/10, please choose "Win8/Win10" at BIOS setup item (Please refer page.65 BOM Config settings.)
5. Specifications are subject to change without notice.
DC in +12V
Single power ATX Support S0, S3, S4, S5
ACPI 3.0 Compliant
AT / ATX mode Switchable Through Jumper
0 ~ 60°C (32~140°F)
-40 ~ +75°C
0%~90% relative humidity, non-condensing
6.7" x 6.7" (170mm x 170mm)
0.40 kg
User's Manual
EMX-BSWP User's Manual 13