Replacing The Y-Carriage Belt - ELNA eXpressive 970 Service Manual

Setscrews (B)
Y-belt holder
Setscrews (A)
Y-belt pulley

Replacing the Y-carriage Belt

E-ring
Y-belt pulley shaft
1. Remove the spool stand, static head right cover and
left cover (see pages 4 – 6).
2. Remove the two setscrews (B) and the Y-belt holder.
3. Loosen the two setscrews (A) and shift the Y-belt
pulley in the direction of the arrow.
4. Remove the E-ring and pull the Y-belt pulley shaft to
remove the Y-belt pulley.
5. Replace the Y-carriage belt.
6. Attach the parts removed in steps 2 – 5.
7. Adjust the Y-carriage belt tension (see the previous
page).
8. Attach the parts removed in step 1.
53