Replacing Carriage Plate (Unit) - ELNA 8200 Service Manual

Model 8200

Replacing Carriage Plate (Unit)

A
C
B
D
C
E
26
To remove:
1. Turn the power switch "ON" and select the pattern
No.1.
2. Turn the power switch "OFF" and remove the Cover
A
cap . (Unlock the hook
3. Turn the power switch "ON" to return the carriage
to the home position.
4. Remove Screws C
Carriage plate (unit)
To attach:
5. Attach the Carriage plate (unit)
screws C temporarily.
6. Adjust the top surface of the carriage plate and the
Arm surface E are parallel and the same level,
securely tighten Screws
7. Attach the cover cap
B from the inside.)
(3 pieces) and remove the
.
D
D and tighten
.
C
.
A