Replacing The Dc Motor - ELNA eXpressive 970 Service Manual

Setscrews
(A)
Motor connector

Replacing the DC Motor

DC motor
58
1. Remove the spool stand, static head right cover and
left cover (see pages 4 – 6).
2. Disconnect the motor connector. Remove the three
setscrews (A) and DC motor.
3. Attach the DC motor and tighten the three setscrews
(A) slightly.
Connect the motor connector.
4. Adjust the motor belt tension (see page 56).
5. Attach the parts removed in step 1.