Replacing Carriage Plate Unit - ELNA 8300 Service Manual

Model 8300
A
C
Replacing Carriage Plate (Unit)
B
D
C
E
To remove:
1. Turn the power switch "ON" and select the pattern
No.1.
2. Turn the power switch "OFF" and remove the Cover
A
cap . (Unlock the hook
3. Turn the power switch "ON" to return the carriage
to the home position.
4. Remove Screws
Carriage plate (unit)
To attach:
5. Attach the Carriage plate (unit)
screws C temporarily.
6. Adjust the top surface of the carriage plate and the
Arm surface E are parallel and the same level,
securely tighten Screws
7. Attach the cover cap
37
B from the inside.)
C
(3 pieces) and remove the
.
D
D and tighten
.
C
.
A