Setscrews
Slope cam
Slope cam guide
Replacing the Jump Solenoid
Connector
Solenoid bracket
1. Remove the head cover (right).
2. Disconnect the connector. Remove the three setscrews
and jump solenoid.
3. The slope cam should slide on the slope cam guide
smoothly. Clean the solenoid if there is any lint or dust
on it.
4. Attach the jump solenoid to the machine.
Tighten the setscrews. Setscrews should be
positioned at center of holes.
5. Attach the head cover (right).
27