Replacing The Thread Catcher - ELNA eXpressive 970 Service Manual

Replacing the Thread Catcher

Connector
Setscrews (A)
Setscrew (B)
To remove:
1. Remove spool stand, head cover (right), right cover, left
cover, moving head and horizontal moving unit.
2. Disconnect the thread catcher connector.
Remove the two setscrews (A), setscrew (B) and the
thread catcher.
To attach:
3. Connect the thread catcher connector.
Tighten the setscrews (A) and setscrew (B) while
pressing the thread catcher unit in the direction of ar-
rows as illustrated.
4. Adjust the thread catcher (see page 38).
5. Attach removed parts.
25