Replacing The Static Head Cover (Right) - ELNA eXpressive 970 Service Manual

Replacing the Static Head Cover (Right)

Caps
RCS mounting arm knob
LED lamp connector
Setscrews (A)
Hooks
K-board connector
To remove:
1. Loosen the RCS mounting arm knob and remove it.
2. Remove caps, and two setscrews (A).
Remove the static head cover (right).
3. Disconnect the LED lamp connector and
K-board connector.
To attach:
4. Connect the LED lamp connector and K-board
connector.
5. Attach the static head cover (right) with the two
setscrews (A). Attach the caps.
6. Attach the RCS mounting arm knob.
5