Adjusting Thread Drawing Lever - ELNA 8300 Service Manual

Model 8300
Standard height of the thread drawing lever from the surface of bobbin holder should be 4.1 mm.
Thread drawing lever
View A
Tread drawing lever

Adjusting Thread Drawing Lever

View A
Surface
of the
bobbin
4.1mm
holder
Hexagonal socket bolt
1 Remove the needle plate.
2 Loosen the hexagonal socket bolt and adjust the
distance of the thread drawing lever by moving the
thread drawing lever.
3 Tighten the hexagonal socket bolt.
4 Attach the needle plate.
33