Action Url On - Yealink SIP-T48G Administrator's Manual

Administrator's Guide for SIP-T2 Series/T19(P) E2/T4 Series/CP860 IP Phones
Variable Value
AlwaysFwdOn/BusyFwdOn/NoAns
wFwdOn=xxx=n
AlwaysFwdOff/BusyFwdOff/NoAns
wFwdOff
CALLEND/CallEnd
ASW/CANCEL/HOLD/UNHOLD:xxx
558
Phone Action
Activate an always/busy/no answer
forward feature to xxx for the IP phone
("xxx" means the destination number)
The valid value of "n" means the duration
time (seconds) before forwarding incoming
calls (n is the times of 6, e.g., 24). It is only
applicable to no answer forward feature.
Note: It works only if the call forward mode
is Phone, the always/busy/no answer
forward feature will apply to all the
accounts on the phone.
Example:
http://10.10.20.10/servlet?key=NoAnswFwd
On=1001=24
Deactive the always/busy/no answer
forward feature for the IP phone.
Note: It works only if the call forward mode
is Phone, the always/busy/no answer
forward feature will apply to all the
accounts on the phone.
Example:
http://10.10.20.10/servlet?key=NoAnswFwd
Off
End a call.
Answer/end/hold/unhold a call (xxx refers
to the call-id of the active call).
Example:
http://10.10.20.10/servlet?key=ASW:33093
Note: To get the call-id of the active call,
configure the action URL:
address/help.xml?CallId=$call_id
more information, refer to
page 534.
http://phone IP
. For
Action URL on