Yealink SIP-T48G Administrator's Manual page 242

Administrator's Guide for SIP-T2 Series/T19(P) E2/T4 Series/CP860 IP Phones
2. Select the desired value from the pull-down list of Save Call Log.
3. Click Confirm to accept the change.
To configure call log feature via phone user interface:
1. Press Menu->Features->History Setting.
2. Press
Record field.
3. Press the Save soft key to accept the change.
Call list show number allows the IP phone to show the phone number instead of the
name in the call log list. To use this feature, make sure the save call log feature is
enabled. For more information on save call log, refer to
Procedure
Call list show number can be configured using the configuration files or locally.
Configuration File
Local
222
or , or the Switch soft key to select the desired value from the History
<y0000000000xx>.cfg
Web User Interface
Save Call Log on page 220.
Configure call list show number.
Parameter:
features.call_log_show_num
Configure call list show number.
Navigate to:
http://<phoneIPAddress>/servlet