Yealink SIP-T48G Administrator's Manual page 663

RPC Method
SetParameterValues
GetParameterValues
GetParameterNames
GetParameterAttributes
SetParameterAttributes
Reboot
Download
Upload
ScheduleInform
FactoryReset
TransferComplete
AddObject
DeleteObject
For more information on TR-069, refer to
Description
supported by the CPE.
This method is used to modify the value of one or
more CPE parameters.
This method is used to obtain the value of one or
more CPE parameters.
This method is used to discover the parameters
accessible on a particular CPE.
This method is used to read the attributes associated
with one or more CPE parameters.
This method is used to modify attributes associated
with one or more CPE parameters.
This method causes the CPE to reboot.
This method is used to cause the CPE to download a
specified file from the designated location.
File types supported by IP phones are:
Firmware Image

Configuration File

This method is used to cause the CPE to upload a
specified file to the designated location.
File types supported by IP phones are:
Configuration File

Log File

This method is used to request the CPE to schedule a
one-time Inform method call (separate from its
periodic Inform method calls) sometime in the future.
This method resets the CPE to its factory default state.
This method informs the ACS of the completion
(either successful or unsuccessful) of a file transfer
initiated by an earlier Download or Upload method
call.
This method is used to add a new instance of an
object defined on the CPE.
This method is used to remove a particular instance
of an object.
Yealink TR-069 Technote
Configuring Advanced Features
.
643