Yealink SIP-T48G Administrator's Manual page 772

Administrator's Guide for SIP-T2 Series/T19(P) E2/T4 Series/CP860 IP Phones
The system log level is set as 6, the informational level.
Note Informational level
dial number), we recommend that you reset the system log level to 3 after providing the
syslog file.
Procedure
Log setting can be configured using the configuration files or locally.
Configuration File
Local
Details of Configuration Parameters:
Parameters
syslog.mode
Description:
Configures
the IP phone to export log files to the local system, syslog server or an
FTP/TFTP Server (provisioning server).
0-Local
1-Server
2-FTP/TFTP Server
Note: If you change this parameter, the IP phone will reboot to make the change
take effect.
Web User Interface:
Settings->Configuration->Export System Log
Phone User Interface:
None
752
may make some sensitive information accessible (e.g., password
<y0000000000xx>.cfg
Web User Interface
Permitted Values
Configure the syslog mode.
Parameters:
syslog.mode
Configure the syslog mode.
Navigate to:
http://<phoneIPAddress>/servlet?m
=mod_data&p=settings-config&q=l
oad
0, 1 or 2
Default
0