Yealink SIP-T48G Administrator's Manual page 277

To configure auto answer and auto answer mute via phone user interface (take CP860 IP
phones for example):
1. Press Menu->Features->Auto Answer.
2. Press the or
3. Press the or
4. Press the Save soft key to accept the change.
IP direct auto answer allows IP phones to automatically answer an IP address call. IP
direct auto answer works only if allow IP call is enabled. For more information on allow
IP call, refer to Allow IP Call
Procedure
IP direct auto answer can only be configured using the configuration files or locally.
Configuration File
Local
Details of Configuration Parameters:
Parameters
features.ip_call_auto_answer.enable
Description:
Enables or disables the auto answer feature for IP call.
0-Disabled
1-Enabled
If it is set to 1 (Enabled), the IP phone can automatically answer IP call.
Note: It works only if the value of the parameter "features.direct_ip_call_enable" is
set to 1 (Enabled). The IP phone cannot automatically answer the incoming IP call
during a call even if IP call auto answer is enabled.
soft key to select Enabled from the Auto Answer field.
soft key to select Enabled from the Auto Answer Mute field.
on page 258.
<y0000000000xx>.cfg
Web User Interface
Configuring Basic Features
Configure IP direct auto answer
feature.
Parameter:
features.ip_call_auto_answer.ena
ble
Configure IP direct auto answer
feature.
Navigate to:
http://<phoneIPAddress>/servlet
?p=features-general&q=load
Permitted Values
0 or 1
Default
0
257