Yealink SIP-T48G Administrator's Manual page 221

Local
Details of Configuration Parameters:
Parameters
dialplan.dialnow.rule.X
(X ranges from 1 to 100)
Description:
Configures the dial-now rule (the string used to match the numbers entered by the
user).
When entered numbers match the predefined dial-now rule, the IP phone will
automatically dial out the numbers without pressing the send key.
Example:
dialplan.dialnow.rule.1 = 123
Web User Interface:
Settings->Dial Plan->Dial-now->Rule
Phone User Interface:
None
dialplan.dialnow.line_id.X
(X ranges from 1 to 100)
Description:
Configures the desired line to apply the dial-now rule. The digit 0 stands for all lines.
If it is left blank, the dial-now rule will apply to all lines on the IP phone.
Permitted Values:
Web User Interface
Permitted Values
String within 511 characters
Refer to the following content
Configuring Basic Features
Configure the delay time for the
dial-now rule.
Parameters:
phone_setting.dialnow_delay
Create the dial-now rule for the IP
phone.
Navigate to:
http://<phoneIPAddress>/servlet
?p=settings-dialnow&q=load
Configure the delay time for the
dial-now rule.
Navigate to:
http://<phoneIPAddress>/servlet
?p=features-general&q=load
Default
Blank
Blank (for
all lines)
201