Yealink SIP-T48G Administrator's Manual page 381

Details of the Configuration Parameter:
account.X.dialoginfo_callpickup
Description:
Enables or disables the IP phone to pick up a call according to the SIP header of
dialog-info for account X.
0-Disabled
1-Enabled
If it is set to 1 (Enabled), call pickup is implemented through SIP signals.
X ranges from 1 to 16 (for SIP-T48G/T46G/T29G)
X ranges from 1 to 12 (for SIP-T42G)
X ranges from 1 to 6 (for SIP-T41P/T27P)
X ranges from 1 to 3 (for SIP-T40P/T23P/T23G)
X ranges from 1 to 2 (for SIP-T21(P) E2)
Note: It is not applicable to SIP-T19(P) E2 and CP860 IP phones.
Web User Interface:
Account->Advanced->Dialog Info Call Pickup
Phone User Interface:
None
To configure dialog info call pickup via web user interface:
1. Click on Account->Advanced.
2. Select the desired account from the pull-down list of Account.
Parameter
Configuring Basic Features
http://<phoneIPAddress>/servlet?p=
account-adv&q=load&acc=0
Permitted Values
0 or 1
Default
0
361