Yealink SIP-T48G Administrator's Manual page 118

Administrator's Guide for SIP-T2 Series/T19(P) E2/T4 Series/CP860 IP Phones
Talk/Dial Power Light On
Talk/Dial Power Light On allows the power indicator LED to be turned on when the IP
phone is busy.
Procedure
Power indicator LED can be configured using the configuration files or locally.
Configuration File
Local
Details of Configuration Parameters:
phone_setting.common_power_led_enable
Description:
Enables or disables the power indicator LED to be turned on.
For SIP-T48G/T46G/T42G/T41P/T40P/T29G/T27P/T23P/T23G/T21(P) E2 IP phones:
0-Disabled (power indicator LED is off)
1-Enabled (power indicator LED is solid red)
For SIP-T19(P) E2 IP phones:
0-Disabled (power indicator LED is off)
1-Enabled (power indicator LED is solid green)
98
<y0000000000xx>.cfg
Web User Interface
Parameters
Configure the power indicator LED.
Parameters:
phone_setting.common_power_le
d_enable
phone_setting.ring_power_led_flas
h_enable
phone_setting.mail_power_led_fla
sh_enable
phone_setting.mute_power_led_fl
ash_enable
phone_setting.hold_and_held_po
wer_led_flash_enable
phone_setting.talk_and_dial_powe
r_led_enable
Configure the power indicator LED.
Navigate to:
http://<phoneIPAddress>/servlet?
p=features-powerled&q=load
Permitted
Values
0 or 1
Default
0