Yealink SIP-T48G Administrator's Manual page 679

This chapter provides information for making configuration changes for the following
audio features:
Ring Tones

Distinctive Ring Tones

Tones

Voice Mail Tone

Headset Prior

Dual Headset

Sending Volume

Audio Codecs

Acoustic Clarity Technology

Ring tones are used to indicate incoming calls acoustically. Users can select a built-in
system ring tone or a custom ring tone for the phone or account. To set the custom ring
tones, you need to upload the custom ring tones to the IP phone in advance.
The ring tone format must meet the following:
Phone Model
SIP-T48G/T46G/T29G
SIP-T42G/T41P/T40P/T27P/T23P/
T23G/T21(P) E2/T19(P)
E2/CP860
Note
The ring tone file must be PCMU audio format, mono channel, 8K sample rate and 16 bit
resolution.
Procedure
Ring tones can be configured using the configuration files or locally.
Configuration File
Format Single File Size
.wav
.wav
<y0000000000xx>.cfg
Configuring Audio Features
Total File Size
<=8MB <=20MB
<=100KB <=100KB
Configure a ring tone for the
IP phone.
Parameter:
659