Yealink SIP-T48G Administrator's Manual page 371

Parameters
X ranges from 1 to 3 (for SIP-T40P/T23P/T23G)
X ranges from 1 to 2 (for SIP-T21(P) E2)
X is equal to 1 (for SIP-T19(P) E2/CP860)
Example:
account.1.group_pickup_code = *69
Note: The group call pickup code configured on a per-line basis takes precedence
over that configured on a phone basis.
Web User Interface:
Account->Advanced->Group Call Pickup Code
Phone User Interface:
None
features.pickup.group_pickup_code
Description:
Configures the group call pickup code on a phone basis.
Example:
features.pickup.group_pickup_code = *98
Note: The group call pickup code configured on a per-line basis takes precedence
over that configured on a phone basis.
Web User Interface:
Features->Call Pickup->Group Call Pickup Code
Phone User Interface:
None
Group Call Pickup Key
For more information on how to configure the DSS Key, refer to
DSS Key on page 796.
Details of Configuration Parameters:
Parameters
linekey.X.type/ programablekey.X.type/
expansion_module.X.key.Y.type
Description:
Configures a DSS key as a group call pickup key on the IP phone.
Configuring Basic Features
Permitted Values
String within 32 characters
Appendix D: Configuring
Permitted Values
Refer to the
23
following content
Default
Blank
Default
351