Yealink SIP-T48G Administrator's Manual page 669

SLAAC
DHCPv6
(ICMPv6)
Disabled Enabled
Enabled Disabled
Enabled Enabled
Procedure
IPv6 can be configured using the configuration files or locally.
Configuration File
Local
How the IP phone obtains the IPv6 address and network
settings?
The IP phone can obtain the IPv6 address via SLAAC, but
the other network settings must be configured manually.
The IP phone can obtain the IPv6 address and the other
network settings via DHCPv6.
The IP phone can obtain the IPv6 address via SLAAC and
obtain other network settings via DHCPv6.
<MAC>.cfg
<y0000000000xx>.c
fg
Web User Interface
Phone User
Interface
Configuring Advanced Features
Configure the IPv6 address
assignment method.
Parameters:
network.ip_address_mode
network.ipv6_internet_port.type
network.ipv6_internet_port.ip
network.ipv6_prefix
network.ipv6_internet_port.gateway
network.ipv6_icmp_v6.enable
Configure the IPv6 static DNS
address.
Parameters:
network.ipv6_primary_dns
network.ipv6_secondary_dns
Configure the IPv6 static DNS.
Parameter:
network.ipv6_static_dns_enable
Configure the IPv6 address
assignment method.
Configure the IPv6 static DNS.
Navigate to:
http://<phoneIPAddress>/servlet?p
=network&q=load
Configure the IPv6 address
assignment method.
Configure the IPv6 static DNS.
649