Yealink SIP-T48G Administrator's Manual page 262

Administrator's Guide for SIP-T2 Series/T19(P) E2/T4 Series/CP860 IP Phones
To configure live dialpad via web user interface:
1. Click on Settings->Preference.
2. Select the desired value from the pull-down list of Live Dialpad.
3. Enter the desired delay time in the Inter Digit Time(1~14s) field.
4. Click Confirm to accept the change.
Call waiting allows IP phones to receive a new incoming call when there is already an
active call. The new incoming call is presented to the user visually on the LCD screen.
Call waiting tone allows the IP phone to play a short tone, to remind the user audibly of
a new incoming call during conversation. Call waiting tone works only if call waiting is
enabled. You can customize call waiting tone or select specialized tone sets (vary from
country to country) for your IP phone. For more information, refer to
The call waiting on code and call waiting off code configured on IP phones are used to
activate/deactivate the server-side call waiting feature. They may vary on different
servers.
Procedure
Call waiting and call waiting tone can be configured using the configuration files or
locally.
Configuration File
Local
242
<y0000000000xx>.cfg
Web User Interface
Tones on page 671.
Configure call waiting and call
waiting tone.
Parameters:
call_waiting.enable
call_waiting.tone
call_waiting.on_code
call_waiting.off_code
Configure call waiting.