Using exacqVision Edge
Features to install and manage exacqVision Edge server software on the camera are found in Setup >
Applications > exacqVision Edge on the camera's web interface. The page will allow the installation or
removal of Edge or if the software is installed, starting or stopping the server. exacqVision Edge cannot
be run without a SD Card installed in the camera. If the Edge and a SD Card are present and Edge will
not start, try removing and reinserting the SD Card or formatting the card from the Storage menu found
at the top of the web interface.
If you need the instructions on running and updating of the exacqVision Edge application via the
camera's webpage, refer to the camera's Configuration Manual for the details.
18
Using exacqVision Edge
Quick Start Guide