CARTON CONTENTS
1) Carefully remove the table saw from the carton.
2) Separate and layout all of the parts. Carefully check them according to the
diagram below.
WARNING
!
If any part is missing or damaged, please do not plug in or use
the table saw until replacements have been obtained.
UNPACKING YOUR TABLE SAW-1
1. Table saw
2. Rip fence
3. Blade guard assembly
4. Miter gauge
5. Anti-kickback pawls
6. 4 mm hex wrench
3
7
1
10
7. Rear support
8. Rear support tube
9. Push stick
10. Blade wrenches
11. Rear support hardware bag
4
8
11
2
5
9
11
6