Download  Print this page

Black & Decker JT2504BD Instruction Manual page 17

10 in. portable table saw
Hide thumbs

Advertisement

Table of Contents
E
STORAGE
Rip fence and miter gauge (Figure F)
Storage for the rip fence (1) and miter
gauge (2) are located on the left side of
the saw housing.
F
1
2
Push stick (Figure G)
A storage holder for the push stick (1) is
located on the left side of the saw housing.
• Store the push stick (1) by hanging it
on the holders (2) through the holes (3)
of the push stick (1).
G
1
3
Transporting
Folding
2
Extra saw blade and blade wrenches
(Figure H)
• Loosen and remove the knob (1) on the
right side of the saw housing.
• Place extra blades (not included), and
blade wrenches (2) onto the arbor.
H
2
1
Installing the power cord storage
clamps (Figure I)
• Attach the power cord storage clamp (1)
into the hole set on the rear side of the
saw housing with screw (2) and nut (3).
NOTE: The nut is placed inside
the saw housing.
• Repeat for the other clamp, to be
located on the bottom right on
saw housing.
I
2
Power cord (Figure J)
Wrap the power cord (1) as shown. Do
not wrap the power cord around the
dust port (2).
17
3
1

Advertisement

Table of Contents
loading

  Related Manuals for Black & Decker JT2504BD