Page 2
DISCLAIMERS The information in this manual has been carefully checked and is believed to be accurate. Cypress Technology assumes no responsibility for any infringements of patents or other rights of third parties which may result from its use. Cypress Technology assumes no responsibility for any inaccuracies that may be contained in this document.
SAFETY PRECAUTIONS Please read all instructions before attempting to unpack, install or operate this equipment and before connecting the power supply. Please keep the following in mind as you unpack and install this equipment: • Always follow basic safety precautions to reduce the risk of fire, electrical shock and injury to persons.
1. INTRODUCTION This Multi-Format to HDMI Scaler is an advanced HDMI, PC, Composite, S-Video and Component switcher/scaler. This device can scale and switch input sources and display them to its HDMI and VGA/HD outputs simultaneously, with their associated audio signals, at a wide range of output resolutions (up to 1080p or WUXGA(RB)).
5. FEATURES • Supports HDMI, Composite Video, S-Video, and PC (VGA)/HD (Component) inputs • Supports HDMI and VGA/Component (with adaptor) outputs • Supports analog stereo, optical and coaxial digital inputs and optical digital output, analog stereo output or embedding to HDMI output •...
6. OPERATION CONTROLS AND FUNCTIONS 6.1 Front Panel CSLUX-300 DIGITAL VIDEO SCALER 720P POWER and LED Press this button to switch the device ON or to put the device into STANDBY mode. When the device is connected to an active power supply, the LED will illuminate and the device will switch ON automatically.
6.2 Rear Panel RS232 OUTPUT INPUT OPTICAL OPTICAL DC 5V PC/HD HDMI HDMI 1 HDMI 2 Cr/Pr Cb/Pb OUTPUTS HDMI: Connect to an HDMI display or amplifier for video and/or audio output. PC/HD: Connect to a monitor/display for video output. For HD (Component) output, use the supplied D-sub 15-pin to 3 RCA adaptor cable for HD resolutions from 480p~1080p.
Page 9
INPUTS HDMI 1: Connect to an HDMI source such as Blu-ray/DVD player for both video and audio signal conversion. HDMI 2: Connect to an HDMI source such as Blu-ray/DVD player for both video and audio signal conversion. PC: Connect to a PC/Laptop source for video signal input with a D-sub 15-pin cable.
6.3 Remote Control POWER INPUT POWER Press this button to switch the device ON COMP or to put the device into STANDBY mode. HDMI 1 HDMI 2 INPUT Press to repeatedly select the required input. An LED will illuminate to indicate EXIT MENU the currently selected source.
6.5 RS-232 Commands COMMAND DESCRIPTION S SOURCE 1~6 1=HDMI1 4=VIDEO 2=HDMI2 5=S-VIDEO 3=YPbPr 6=PC R SOURCE Reports the numerical equivalent for SOURCE setting (as above) S OUTPUT 0~25 0=Native 12=1600×1200 1=640×480 13=1920×1080 2=800×600 16=1920×1200 3=1024×768 17=480p 4=1280×768 18=720p@60 5=1360×768 19=1080p@60 6=1280×720 20=1080i@60 7=1280×800...
Page 13
COMMAND DESCRIPTION S HUE 0~60 Setups the numerical equivalent for HUE setting (as left) R HUE Reports the numerical equivalent for HUE setting S SATURATION 0~60 Setups the numerical equivalent for SATURATION setting (as left) R SATURATION Reports the numerical equivalent for SATURATION setting S SHARPNESS 0~30 Setups the numerical equivalent for...
3. Only LPCM 2 channel digital audio is supported, please ensure that the source audio is set to LPCM 2 channel audio in order to avoid unnecessary audio noise. 4. RS-232 commands will be not executed unless followed with a carriage return and LF. Commands are case-insensitive. 6.6 OSD Menu MAIN MENU SUBMENU 3RD MENU 4TH MENU DISPLAY OUTPUT 640×480 60 800×600 60 1024×768 60 1280×768 60 1360×768 60 1280×720 60 1280×800 60 1280×1024 60 1440×900 60 1400×1050 60 1680×1050 60 1600×1200 60 1920×1080 60 1920×1200 60...
Page 15
MAIN MENU SUBMENU 3RD MENU 4TH MENU DISPLAY SIZE OVER SCAN (For VIDEO input) FULL* BEST FIT PAN SCAN LETTER BOX UNDER 2 UNDER 1 MODE INFO INFO* AUTO SETUP (For PC input) H_POSITION V_POSITION PHASE CLOCK WXGA/XGA XGA* WXGA RESET...
Page 16
MAIN MENU SUBMENU 3RD MENU 4TH MENU COLOR COLOR R OFFSET G OFFSET B OFFSET CONTRAST 0~60 BRIGHTNESS 0~60 0~60 SATURATION 0~60 SHARPNESS 0~30 OFF* MIDDLE HIGH AUDIO VOLUME 0~100 DELAY OFF* 40 ms 110 ms 150 ms SOUND MUTE AUDIO SELECT ANALOG* S/PDIF...
Page 17
MAIN MENU SUBMENU 3RD MENU 4TH MENU SETUP FACTORY RESET KEY LOCK OFF* POWER SAVE OFF* INFORMATION INPUT OUTPUT REVISION Note: Items with Asterisk (*) are the Factory default settings.
7. CONNECTION DIAGRAM HD Satellite Receiver HDMI, Optical Digital and Analog Audio Inputs Blu-ray/DVD Player PC or RS-232 Control System HDMI, Composite Video and Analog Audio Inputs RS-232 Set-top Box Power Supply RS232 OUTPUT INPUT OPTICAL OPTICAL DC 5V PC/HD HDMI HDMI 1 HDMI 2...
9. ACRONYMS ACRONYM COMPLETE TERM COMP Component Video Composite Video Digital Visual Interface EDID Extended Display Identification Data HDCP High-Bandwidth Digital Content Protection HDMI High-Definition Multimedia Interface Infrared Noise Reduction NTSC National Television System Committee On-screen Display (Menu) Phase Alternating Line Red Green Blue S-Video Universal Serial Bus...
Need help?
Do you have a question about the CSLUX-300 and is the answer not in the manual?
Questions and answers