Web Interface Connection To The Controller - Mitel SX-200 ICP Technician's Handbook

SX-200 ICP CX/CXi Technician's Handbook

Web Interface Connection to the Controller

A web browser can be used to connect to the SX-200 ICP from the LAN
and manage the system using the embedded SX-200 ICP Web Interface.
Before using the SX-200 ICP Web Interface, configure the management
PC as follows:
• disable your web browser's pop-up blocker software
• install Sun Java plugin version 1.5 or later
With the controller connected to the LAN and the PC connected to the LAN
or Internet:
1. Launch the web browser (IE 6.x or Mozilla Firefox).
2. Enter http://<controller IP or hostname>
For example, http://192.168.1.2
The IP address in the example is the default; use Form 47 to check or
change it.
3. Log in to the SX-200 ICP Web Interface with login name 'installer' and
default password '1000.'
A CDE session will open.
While the session is active, do not disconnect the Ethernet cable or
attempt to open another maintenance session with a serial connection.
Doing so will cause an error message stating that CDE is currently in use.
72