Table of Contents
Advertisement
fs: Subprogram file name
Entries enclosed by [ ] may be omitted.
[
:] [
3 characters
Within 16 characters
Device name
•
Entry of "fs" may be omitted when:
•
No subprogram call command is specified in a main program.
•
The subprogram called from a main program or subprogram exists in MD1:*.SSB (system
subprogram) or in MD1:*.MSB (manufacturer subprogram).
•
Required subprograms other that SSB and MSB are contained in the main program file. If
fs is specified, the device name and extension may be omitted. The defaults for the device
name and extension are "MD1" and "SUB", respectively.
omitted, it is assumed that no file has been specified.
•
An alarm will occur if the total number of subprograms used exceeds 126.
•
An alarm will occur if "RTS" which means the end of a subprogram is not specified.
An alarm will occur if the file specified by "fs" does not exist.
n: Repetition count
Q
=
Expression
Q: Number of repetitions (specified by address)
The setting range is from 1 to 9999 and "1" is assumed to apply if entry of "n" is omitted. An alarm
will occur if a number outside the range 1 to 9999 is specified.
A space (" ") may be used instead of "=". "=" may be omitted if it is directly followed by a numeric
value.
] [.
3 characters
Extension
File name
SECTION 13 SCHEDULE PROGRAMS
]
Therefore, if everything is
5238-E P-317
LE33013R0301500020004
LE33013R0301500020005
Advertisement
Table of Contents
