Cool Operation; Auto Operation - SPT WA-1240AE1 Instruction Manual

How To Use The Basic Functions
The operating temperature range for the unit is 17°C-30°C
(62°F-86°F). You can increase or decrease the set temperature
in 1°C(1°F) increments
3
ON/OFF SHORT
CUT
1
MODE TIMER
ON
TEMP
TIMER
FAN
OFF
SLEEP SWING
LED

AUTO OPERATION

In AUTO mode, the unit will automatically select COOL,
FAN, HEAT (heating models only), or DRY mode based
on the set temperature
1. Press the MODE button to select Auto mode.
2. Set your desired temperature using the
Temp Up/Down button.
3. Press the ON/OFF button to start the unit.
NOTE: FAN SPEED can t be set in Auto mode.
4
1
3
2
HEAT OPERATION
1. Press the MODE button to
2. Set desired temperature using the
Temp Up/Down button.
3. Press the FAN button to select the
fan speed: AUTO, LOW, MED,or HIGH.
4. Press the ON/OFF button to start.
NOTE: As outdoor temperature drops,the performance
of your unit's HEATfunction may be affected. In such
instances, it is recommended to use this unit in
conjunction with other heating appliance.
NOTE: Heat mode is for cooling & heating models only.
ON/OFF SHORT
CUT
TIMER
MODE
ON
TEMP
TIMER
FAN
OFF
SLEEP SWING LED
select HEAT .
19

COOL OPERATION

1. Press the MODE button to select COOL
2. Set your desired temperature using
the Temp Up/Down button.
3. Press the FAN button to select the fan
speed: AUTO, LOW, MED or HIGH.
4. Press the ON/OFF button to start the
2
ON/OFF SHORT
4
CUT
1
TIMER
MODE
ON
TEMP
3
TIMER
FAN
OFF
SLEEP SWING LED
2