Operation; Mode Button; Fan Button; Timer Button - SPT WA-1240AE1 Instruction Manual

Operation

Swing button
Used to initiate the Auto swing feature.
If auto-swing is in function, press the
button again to stop the louver at
desired angel.

Timer button

Used to initiate the AUTO ON (start
time) and AUTO OFF (stop time)
buttons. The
corresponding timer indictor light will
illuminate.

Mode button

Selects the appropriate operating mode. Each press of
the button will select mode in the following sequence:
AUTO, COOL, DRY, FAN and HEAT (heating models
only). The corresponding mode indicator will illuminate.
1°C/1°F increments.
Adjustable range:
NOTE: The control is capable of displaying temperature
in Fahrenheit or Celsius. To convert from one to the
other, press and hold the Up and Down buttons
simultaneously for 3 seconds.
9

Fan button

Controls the fan speed. Press to select the
fan speed in four steps: LOW, MED, HIGH
and AUTO. The corresponding fan speed
indicator will illuminate, except for AUTO
speed. When AUTO is selecyed, all fan
indicators are dark.
setting in

Sleep button

Used to initiate the SLEEP function.

Power button

Power switch, turns unit on/off.