Tools Needed - SPT WA-1240AE1 Instruction Manual

Installation

Tools Needed

-Medium Philips screwdriver; -Tape measure or ruler; -Knife or scissors;
-Saw (optional, to shorten window adaptor for narrow windows)
Accessories
be shortened for smaller windows.
Part
Unit Adaptor
Exhaust Hose
Window Slider Adaptor
Bolt
Window Slider A
Window Slider B
Foam Seal A (Adhesive)
Foam Seal B (Adhesive)
Foam Seal C (Non-adhesive)
Security Bracket and 2 Screws
Drain Hose
Drain Hose Adaptor
(for Heating models only)
Remote Controller
(2 AAA batteries, not included)
Description Quantity
1 pc
1 pc
1 pc
1 pc
1 pc
1 pc
2 pc
2 pc
1 pc
1 set
1 pc
1 pc
1 pc
Window Installation Kit
Step One: Preparing the Exhaust Hose assembly
Press window slider adaptor and unit adaptor onto the exhaust hose.
Clips on the adaptors will automatically clamp onto the exhaust hose.
Exhaust hose
Unit adaptor Window slider
adaptor
Step Two: Install the Exhaust hose assembly to the Unit
Align the hooks on the unit adaptor to the hole seat of the air outlet
(located on the back of the unit). Insert adaptor and slide hose assembly
downwards into the groove.
Hole Seat
Hook
Make sure the adaptor is inserted into the lower
Lower groove
adaptor
groove of the air outlet.
Window slider A
Exhaust hose
assembly
Bolt
Window slider B