SPT WA-60FMS1 User Manual

Window air conditioner

Hide thumbs

Quick Links

WIND O W / WALL TYPE

WINDOW AIR CONDITIONER

WIND O W / WALL TYPE

Important Safety Instructions ..........................1-3

Installation Instructions

Normal Sounds

.................................................9

WA-60FMS1: 6,000 BTU

WA-80FMS1: 8,000 BTU

WA-10FMS1: 10,000 BTU

WA-12FMS1: 12,000 BTU

MULTI-STEP SPEED ELECTRONIC CONTROL

T A B L E O F C O N T E N T S

....................................

Air Conditioner Features

Care and Cleaning ...................................... 1 1-12

4-8

Remote Control .....

Troubleshooting T ip . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 . 6

Before using your air conditioner, please read

this manual carefully and keep it for future reference.

..............................

.....................................

10-11

12-15

Need help?

Do you have a question about the WA-60FMS1 and is the answer not in the manual?

Questions and answers

Summary of Contents for SPT WA-60FMS1

Page 1: Table Of Contents
WIND O W / WALL TYPE WIND O W / WALL TYPE WIND O W / WALL TYPE WIND O W / WALL TYPE WA-60FMS1: 6,000 BTU WA-80FMS1: 8,000 BTU WA-10FMS1: 10,000 BTU WA-12FMS1: 12,000 BTU MULTI-STEP SPEED ELECTRONIC CONTROL...
Page 2: Important Safety Instructions
IMPORTANT SAFETY INSTRUCTIONS READ THIS MANUAL Inside you will find many helpful hints on how to use and maintain your air conditioner properly. Just a little preventive care on your part can save you a great deal of time and money over the life of your air conditioner. You'll find many answers to common problems in the chart of troubleshooting tips.
Page 3 IMPORTANT SAFETY INSTRUCTIONS AUTION When removing and cleaning Do not situate a pet or house Keep room well ventilated if the filter, be cautious of sharp plant where it will be exposed to used within the same room direct air flow. edges and corners.
Page 4 IMPORTANT SAFETY INSTRUCTIONS WARNING NOTE: For Your Safety The power supply cord with this air Do not store or use gasoline or other flammable vapors and liquids in the vicinity conditioner contains a current detection of this or any other appliance. device designed to reduce the risk of fire.
Page 5: Installation Instructions
23 to 36 inches(584mm to 914mm) . Pencil Ruler or tape measure Scissors or knife NOTE: Save Carton and these Installation Instructions WA-60FMS1 WA-10FMS1 Model WA-80FMS1 WA-12FMS1 for future reference. The carton is the best way Min vertical 15.5"...
Page 6: Mounting Hardware
Fig. A. NOTE: For safety reasons, all four(4) screws MUST NOTE: Top rail hardware and installation is only be securely fastened. applicable to models WA-60FMS1 and WA-80FMS1. NOTE: The top rail must be assembled before installing the unit. Top Rail Hardware...
Page 7 " "section against the window sill (Fig.5). Carefully bring the window down behind the top rail. Measure from the cabinet edge WA-60FMS1 & WA-80FMS1 H: approx. 3/4" to 1" WA-10FMS1 & WA-12FMS1 INSIDE H: approx. 1" to 1 3/8"...
Page 8 INSTALLATION INSTRUCTIONS B. Drive 3/4" (19mm) or 1/2" (12.7mm) locking screws through frame holes into window sash (Fig.8). Fig.8 C. To secure lower sash in place, attach right angle sash lock with 3/4" (19mm) or 1/2" (12.7mm) screw as shown in Fig. 9. Measure the inner width of the side curtain Fig.11...
Page 9 INSTALLATION INSTRUCTIONS INSTALL WEATHER STRIPPING If AC is Blocked by Storm Window Add wood as shown in Fig.15, or remove storm Installing the weather strip will minimize air leaks window before air conditioner is installed. between the air conditioner and window opening. Trim the weather strip to the proper length, peel off the If Storm Window Frame must remain, be sure the protective backing and insert into any gaps and...
Page 10: Normal Sounds
NORMAL SOUNDS High Pitched Chatter High efficiency compressors may have a high pitched chatter Vibration during the cooling cycle. Unit may vibrate and make noise because of poor wall or window construction or incorrect installation. Sound of Rushing Air At the front of the unit, you may hear the sound of rushing air being moved by the fan Pinging or Switching...
Page 11 AIR CONDITIONER FEATURES SLEEP FEATURE: TO SELECT THE OPERATING MODE: Press Sleep button to initiate the sleep mode. To choose operating mode, press Mode button. With The unit will operate at the set temperature for 30 each press of the button, the mode will cycle through the following sequence: Auto, Cool, Dry and Fan.
Page 12: Care And Cleaning
AIR CONDITIONER FEATURES DISPLAYS: ADDITIONAL THINGS YOU SHOULD KNOW Displays Now that you have mastered the operating procedure, Temp Temp here are more features in your control that you should become familiar with. Timer Timer The Cool circuit has an automatic 3 minute time delay when unit is turned off and on quickly.This DISPLAYS: protects the compressor from overheating and...
Page 13: Remote Control
CARE AND CLEANING Cabinet Cleaning Winter Storage Be sure to unplug the unit to prevent shock or firehazard. The If you plan to store the air conditioner during the winter, cabinet and front may be dusted with an oil-free cloth or wipe remove it carefully from the window according to the with a cloth dampened in a warm water and mild detergent installation instructions.
Page 14 1. ON/OFF Button: Push this button to start operation, push again to stop operation. NOTE: unit automatically initiates Energy Saver function when operating under Cool, Dry and AUTO modes. 2. MODE Select Button : Press to select desired operation mode: AUTO - COOL - DRY - FAN.
Page 15 SETTING THE CLOCK AUTO MODE °C/70°F to 28°C/82°F. COOLING & FAN MODE Ensure unit is plugged in and power is available. 1. Press MODE button to select COOL or FAN. 2. Press the UP/DOWN button to set desired temperature. Most comfortable temperature range is between 21°C/70°F to 28°C/82°F. 3.
Page 16: Remote Control
TIMER OPERATION ; then in 1 hour increments up to 24 hours. The set time will register 3 seconds after setting. Once set, the TIMER ON or TIMER OFF indicator on the display panel will be illuminated. Canceling 3. Press CANCEL to cancel any timer setting When timer is set, the remote controller transmits the timer signal to the unit at a specified time.

This manual is also suitable for:

Wa-80fms1 Wa-12fms1 Wa-10fms1