Table of Contents
Advertisement
ADASH Ltd.
Information line
After powering on the display shows measured data. Beyond descriptions of the measured values and
their actual values the display shows an information line in its upper part.
Fig. Information line on a display
Meaning of Displayed Symbols:
bars,
filled in, the more battery power remains. If the status goes under 20 %, the remaining energy shows
in red, if it is insufficient, the symbol is red and the instrument switches itself off.
Battery status symbol:
100%
Using of Headphones
The instrument is equipped by a 0.5 W amplifier for connecting of headphones and listening to a
measured signal. We can connect the headphones by a stereo 3.5 mm jack marked phones on the top
of the instrument (see figure in the Connectors chapter). After connecting we can hear a signal from
the vibration sensor in the headphones. Advisable volume can be set-up by the VOLUME item from
the instrument menu (see MENU chapter)
Decrease volume
button
- moving "wave" signifies measurement in progress,
- setting of headphone output volume is indicated by yellow colouring of the
- this symbols shows an approximate battery status. The more is the symbol
approx. 50%
under 20%
22
Adash 4900 – Vibrio III
just before switching off
Increase volume
button
Switch measuring
/ volume control
button
Advertisement
Table of Contents
